How to disable validating identity on wireless network
Your computer only allows one network connection at a time.This means that you will have to disconnect (unplug) the cellular modem (aircard) from the computer and close the cellular connection manager tool provided by your cellular carrier or, disconnect from any LAN (wired Ethernet) or Wi-Fi (wireless) connections before you will be able to connect your computer to the router either by Ethernet cable or Wi-Fi.
Not all the configuration settings will be available on all devices.Sometimes when the settings of the client device and the router don't exactly match, the client won't see the router's Wi Fi network.If you're running in this issue, try the following: Check if there are other wifi-capable client devices (laptops, tablets, phones, etc) that CAN see the Cradlepoint's wifi network. For more information about the wireless network, including coverage areas and general information see the Wireless Network Overview. In this window type in your Truman Student ID and then the Password that correlates with this ID (this id and password are also used for campus computers login and Tru View) and select .You may notice that the “Truman Secure Wireless” network has been found, but due to specific settings needed for a complete connection to the Truman Network this will not allow a proper connection. – A free virus program courtesy of Truman State can be downloaded here.* You will not be prompted for your username and password or to validate the server certificate every time you connect.